User`s manual

BASIC EFFECTS : EFFECTS CONCEPTS

02.9651.0001 C 23-Sep-02 125

Effects Control Panel and Windows

All effects and effect components (sets, sequences, parts, steps) can be created using

either the Effects Control panel in combination with the select displays, the effects

windows, and for some components, the command-line keypad.

Effects Control Panel (Virtuoso Console)

Components of an effect can be created using the Effects panel, command-line

keypad, and/or associated effects windows.

When an effect is selected, its attributes will appear in the Effect Control display and

the direction, mode, and start buttons associated with that effect will light. The same

information will also be available in the Effects, Sets, and Sequences windows.

The soft select displays located on the Effects panel function just as the other soft

select displays. The bottom select display provides presets, colors, beams, groups,

macros, snapshots, and effects just as the manual control select displays. The top

select display provides access to effects, sets, sequences, parts, and steps for the

purpose of creation, modification, or playback.

Refer to “Panel Select Displays” on page 77 for instructions on using select displays.

Effects Level

Timing Attributes

Effect

Set

Sequence

effect times

fIn fOut dur step

00.00 00.00 00.00 00.00

Effect Number

Set used in the effect

Sequence used in the effect

(Covered in Ch. 13)

Effect Control Display

Chase

VL6

Colors