User`s manual

BASIC CUES : PLAYBACK
7
02.9651.0001 C 23-Sep-02 121
Playback
Basic Playback
After storing a cue, it can be played back using a submaster.
Play a cue:
Step 1. At keypad, press [Cue] [n] [Enter] or scroll through cue list to recall a cue.
Its number and label will be displayed in the command-line display.
Step 2. At desired submaster, press [Select] to
select submaster for playback function.
Step 3. Press [Load] to place cue in submaster’s
pending file.
Step 4. Ensure Grand Master fader is set at full.
Step 5. Ensure submaster fader is set at full.
Step 6. Press [Go] to play cue.
Step 7. Press [Run] to replay cue once it is active.
Play next cue:
The submaster always sequences, placing the next
available cue in the pending file.
• Press [Go] to play back pending cue.
Play previous cue:
The submaster can play back previously played
cues in decrementing order.
• Press [Back] to play previous cue.
If submaster is empty: at keypad press [cue
number], then at submaster press [Go]. (Must be
valid cue number.)
set cue 52
Cue 52 ∗
FC
BD
52
Blwash
I
G
rate 100
53
Rdwash
F
I
F
G
E
CB
C T
52
Selects submaster
for playback
Loads cue
Plays active cue
Plays pending cue
Stops and steps
through cue
Plays last cue
Scales intensity
Active cue
Pending cue
Blwash
01
Select
Load
Run
Stop/
Step
Back
Go
Shows autofollow time, or
cue execution time if no
autofollow is specified.
Shortcut