User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
106 23-Sep-02 02.9651.0001 C
Send colors using window only:
Step 1. Select required channels.
Step 2. Using cursor, select color choice.
Step 3. Click Send button (or just double-click on color choice). Luminaires able to
achieve the color will do so. Luminaires unable to achieve color will go to
black, except for VL6 luminaires, which go to white.
Send colors using window and keyboard:
Step 1. Select required channels.
Step 2. Using cursor, sort list by Color, ID, or Gel.
Step 3. At keyboard type in first few letters of color, ID number, or Gel number.
Selection will be highlighted in window.
Step 4. Press keyboard [Enter] button to send.
From Keypad
The command-line keypad can also be used to assign VARI❋LITE colors to selected
luminaires. The color number entered on the keypad corresponds to the colors listed
in the VARI❋LITE Color System Charts starting on the next page.
Examples:
• <Chan> [n] [Vari-Lite Color] [m] [Enter] - applies VARI❋LITE color m to the
selected channel n (where m is the discrete color number).
• <Chan> [n] [Thru] [q] [Vari-Lite Color] [m] [Enter] - applies VARI❋LITE color m
to the selected range of channels (where m is the discrete color number).