User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
100 23-Sep-02 02.9651.0001 C
Recall two or more groups:
Step 1. Access required Bank and Page of first group.
Step 2. Press required [Group Select Button].
Step 3. Access required Bank and Page of second group.
Step 4. Press required [Group Select Button] of second group. Hold down [Page
Button] to pile-on selections.
Step 5. Repeat Steps 3 and 4 as required.
Modify a group:
Modifications to existing groups can be done in the same manner as storing the
original group as given above.
From Select Displays Window
When storing or modifying Groups from the Select Displays, first select channels to be
stored in the Group (refer to “Selecting Channels” on page 50).
To store, label, update, delete, and recall groups, refer to the procedures given in
“Select Displays Window” on page 80.
From Keypad
Store a Group:
Step 1. Select channels to be stored in group (refer to “Selecting Channels” on
page 50).
Step 2. Press [Store] [Group] [n] [Enter].
Modify a Group:
Modifications to existing Groups can be done in the same manner as storing the
original Group given above.
Recall a Group:
The following are samples of possible command-line entries to recall a group.
• [Group] [n] [Enter] - selects all channels in Group n.
• [Group] [n] [+] [m] [Enter] - selects all channels in Group n plus Channel m.
• [Group] [n] [+] [Group] [m] [Enter] - selects all channels in Group n and Group m.
Groups can be stored, modified, and recalled using the Group Select panel, command-
line keypad, and/or soft select displays.