User`s manual

SELECT DISPLAYS : GROUPS
5
02.9651.0001 C 23-Sep-02 99
Groups
Overview
To automate channel selection, groups of channels may be stored into the Group
selects available in the panel Select Displays, Select Displays window, or Group
Select portion of the Channel Select panel (Virtuoso only). Groups can also be created
and recalled from the command-line keypad.
For example, you could store all VL5 luminaires as one group, all VL6 luminaires as
another group, etc. These groups can be labeled in the group select bank as VL5 and
VL6 or perhaps, Wash and Spot.
Storing, Modifying, and Recalling Groups
Note: When an existing Group is updated or re-stored, the new information replaces
the old information. It does not add to the existing group information.
From Panel Select Displays
Store a group:
Step 1. Select channels to be stored in group (refer to “Selecting Channels” on
page 50).
Step 2. Access required Bank and Page.
Step 3. Press [Store] / [Group Select Button] or [Store] [Label] / [Group Select
Button] [xxxxxx] [return]
Label a group:
When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The [return]
button is also located on the keyboard.
• [Label] / [Group Select Button] [xxxxxx] [return].
Recall a group:
Step 1. Access required Bank and Page.
Step 2. Press required [Group Select Button].