User`s manual

SELECT DISPLAYS : PRESETS

02.9651.0001 C 23-Sep-02 97

Recall a preset using command-line keypad:

Step 1. Select required channels (only selected channels that have data stored in that

Preset will be affected).

Step 2. Press [Preset] [n] [Enter] (where n is the discrete Preset number).

Recall specific preset data:

Note: For more information, refer to “Selective Recall” on page 218.

Step 1. At touch screen display, select Filter mode. Using touch screen, select

parameters to be recalled.

Step 2. Select channel(s) as required.

Step 3. Press [Recall] [Preset] [n] [Enter] or [Recall] [Preset Select Button]. All

stored data will be recalled from the specified preset (n), as defined by the

selections on the filters.

From Select Displays Window

When storing or modifying Presets from the Select Displays, first select channels to be

stored in the Preset select (refer to “Selecting Channels” on page 50). Filter

parameters as required and adjust with manual control functions.

To store, label, update, delete, and recall Presets, refer to the procedures given in

“Select Displays Window” on page 80.

From Keypad

Note: All Presets have a discrete number which is used when accessing Presets from

the keypad. Presets maintain this number, even when given another label.

Store a new Preset:

Step 1. Select required channels.

Step 2. Using manual controls, set all required parameters.

Step 3. Filter attributes as required using Filter Display window.

Step 4. Press [Store] [Preset] [n] [Enter] or [Store] [Preset] [n] [Label] [xxxxxx]

[return] (where n is the discrete Preset number).

Add new channels to a Preset:

Step 1. Select required channels.

Step 2. Press [Store] [Preset] [n] [Enter] or [Store] [Preset] [n] [Label] [xxxxxx]

[return] (where n is the discrete Preset number).