User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
96 23-Sep-02 02.9651.0001 C
Modify parameters using Selective Store:
The Selective Store command modifies parameter data for selected channels as
determined by any filter settings. For more information, refer to “Selective Store” on
page 217.
Step 1. At touch screen display, modify filter settings as required.
Step 2. Select required channels.
Step 3. Press [Sel Store] / [Preset Select Button] or [Sel Store] [Preset] [n] [Enter]
(where n is the discrete Preset number).
Update a preset:
The [Update] command does not add channels, but modifies any stored data that has
been changed by manual control for channels and parameters associated with that
Preset. It does not route through the filter settings. For more information, refer to
“Update” on page 216.
Step 1. Make changes by manual control.
Step 2. Press [Update] / [Preset Select Button] or [Update] [Preset] [n] [Enter]
(where n is the discrete Preset number).
Delete an entire Preset:
Step 1. Select all channels in that Preset.
Step 2. [Delete] [Preset] [n] [Enter] (where n is the discrete preset number) or
[Delete] / [Preset Select Button]. The display will now show this as an
“empty” Preset.
Note: Unexpected behavior may occur for cues referencing a deleted preset. Cues
will be played back with intensity at zero for channels that reference a deleted preset.
This acts as a warning that cue data is incomplete. To verify this has happened, check
the console log window available from the Setup menu.
Delete a specific channel’s Preset data:
Step 1. Select channels you wish to remove from a Preset.
Step 2. [Delete] [Preset] [n] [Enter] (where n is the discrete preset number) or
[Delete] / [Preset Select Button].
Recall a preset using Presets select display:
Step 1. Select required channels (only selected channels that have data stored in that
preset will be affected).
Step 2. Ensure Presets are selected on at least one select display.
Step 3. Press required [Preset Select Button].