User`s manual

SELECT DISPLAYS : PRESETS
5
02.9651.0001 C 23-Sep-02 95
Storing, Modifying, and Recalling Presets
From Panel Select Displays
Note: When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The
[return] button is also located on the keyboard.
Store a new preset using Presets select display:
Step 1. Select required channels.
Step 2. Ensure Presets are selected on at least one select display.
Step 3. Using manual controls, set all required parameters.
Step 4. Filter attributes as required using touch screen display.
Step 5. Press [Store] / [Preset Select Button] or [Store] [Label] / [Preset Select
Button] [xxxxxx] [return].
Store a new preset using command-line keypad:
Step 1. Select required channels.
Step 2. Using manual controls, set all required parameters.
Step 3. Filter attributes as required using touch screen display.
Step 4. Press [Store] [Preset] [n] [Enter] or
[Store] [Preset] [n] [Label] [xxxxxx] [return] (where n is the discrete Preset
number).
Label an existing Preset select:
Step 1. Ensure Presets are selected on at least one select display.
Step 2. Press [Label] / [Preset Select Button] [xxxxxx] [return].
Add new channels to a Preset:
If a Preset is already stored, the [Store] command can add new channels to that Preset,
provided those channels are selected. If the channel already has data for the Preset,
that data will be overwritten with current data.
Step 1. Select required channels.
Step 2. Ensure Presets are selected on at least one select display.
Step 3. Press [Store] / [Preset Select Button] or [Store] [Label] / [Preset Select
Button] [xxxxxx] [return].