User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
92 23-Sep-02 02.9651.0001 C
Recall a color using command-line keypad:
Step 1. Select required channels.
Step 2. Press [Color] [n] [Enter] (where n is the discrete Color number).
Note: Channels that are selected during a color recall that have no value for that color
will remain in their current state.
From Select Displays Window
When storing or modifying Colors from the Select Displays, first select channels to be
stored in the Color select (refer to “Selecting Channels” on page 50).
To store, label, update, delete, and recall Colors, refer to the procedures given in
“Select Displays Window” on page 80.
From Keypad
Store a new Color:
Step 1. Select required channels.
Step 2. Using manual controls, set all required parameters.
Step 3. Press [Store] [Color] [n] [Enter] or [Store] [Color] [n] [Label] [Enter]
[xxxxxx] [return] (where n is the discrete Color number).
Delete a Color:
• [Delete] [Color] [n] [Enter]. The display will now show this as an “empty” Color.
Note: This action will delete color information for all types stored.
Recall a Color:
Step 1. Select required channels (only selected channels that have data stored in that
Color will be affected).
Step 2. Press [Color] [n] [Enter] (where n is the discrete Color number).