User`s manual

SELECT DISPLAYS : COLORS

02.9651.0001 C 23-Sep-02 91

Storing and Recalling Colors

Note: Beams and colors are global settings by luminaire type. The console will draw

data from either lowest active or lowest selected channel as determined by the

console’s default settings (refer to “Settings Window” on page 258). The "lowest

active" setting draws data from the lowest channel number with intensity of that type,

regardless of selection. The "lowest selected" setting draws data from the lowest

selected channel number of that type, regardless of intensity state.

From Panel Select Displays

Store a new color using Colors select display:

Step 1. Ensure color you wish to store is displayed in lowest active luminaire

channel (for each luminaire type), if the default "lowest active channel" has

not been changed (refer to “Settings Window” on page 258).

Step 2. Ensure Colors are selected on at least one select display.

Step 3. Select required bank and select page.

Step 4. Press [Store] / [Color Select Button].

Store a new color using command-line keypad:

Step 1. Ensure color you wish to store is displayed in lowest active luminaire

channel (for each luminaire type), if the default "lowest active channel" has

not been changed (refer to “Settings Window” on page 258).

Step 2. Press [Store] [Color] [n] [Enter] (where n is the discrete Color number).

Label an existing color, page, or bank:

Note: When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The

[return] button is also located on the keyboard.

Step 1. Ensure Colors are selected on at least one select display.

Step 2. Press [Label] / [Color Select Button] [xxxxxx] [return] or

[Label] / [Page Select Button] [xxxxxx] [return] or

[Label] / [Bank Select Button] [xxxxxx] [return] as required.

Recall a color using Colors select display:

Step 1. Select required channels.

Step 2. Ensure Colors are selected on at least one select display.

Step 3. Press required [Color Select Button].