User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
86 23-Sep-02 02.9651.0001 C
Label an existing Beam, page, or bank:
Note: When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The
[return] button is also located on the keyboard.
Step 1. Ensure Beams are selected on at least one select display.
Step 2. Press [Label] / [Beam Select Button] [xxxxxx] [return] or
[Label] / [Page Select Button] [xxxxxx] [return] or
[Label] / [Bank Select Button] [xxxxxx] [return] as required.
Add a new luminaire type to a Beam:
If you are modifying a Beam by storing a new type of luminaire(s), then the new data
will be added to the existing data.
Step 1. Select required channel(s). (The channel should contain at least one different
luminaire type than currently stored in the Beam.)
Step 2. Ensure Beams are selected on at least one select display.
Step 3. Using manual controls, set all required parameters.
Step 4. Filter attributes as required using touch screen display in Filter mode.
Step 5. Press [Store] / [Beam Select Button] or [Store] [Label] / [Beam Select
Button] [xxxxxx] [return].
Modify Beam data for an existing luminaire type:
If you are modifying a Beam with data from the same type of luminaire, then the data
will be replaced.
Step 1. Select required channel(s). (The channel should contain the same luminaire
type as currently stored in the Beam.)
Step 2. Ensure Beams are selected on at least one select display.
Step 3. Using manual controls, set all required parameters.
Step 4. Filter attributes as required using touch screen display in Filter mode.
Step 5. Press [Store] / [Beam Select Button] or [Store] [Label] / [Beam Select
Button] [xxxxxx] [return].
Delete a Beam:
• [Delete] [Beam] [n] [Enter] or
[Delete] / [Beam Select Button]. The display will now show this as an “empty”
Beam select.
Note: This action will delete beam data for all types included in beam select.