User`s manual

SELECT DISPLAYS : GENERAL OPERATION

02.9651.0001 C 23-Sep-02 79

Applying Selects

Apply a Beam:

Step 1. Select required luminaire(s) for manual control.

Step 2. Access required page by pressing any one of five page buttons next to the

[Bank/Function] button.

Step 3. Press [Beam Select Button] for desired gobo. Selected luminaires will

change.

Apply a Color:

Step 1. Select required luminaire(s) for manual control.

Step 2. At Colors select display, access required bank by pressing [Function/Bank]

plus desired bank (1 through 3).

Step 3. Access required page by pressing any one of five page buttons next to the

[Bank/Function] button.

Step 4. Press [Color Select Button] of desired color. Selected luminaires will

change.