User`s manual

SELECT DISPLAYS : GENERAL OPERATION
5
02.9651.0001 C 23-Sep-02 77
Note: Some DMX profiles have, as a default, the full frame wheel positions. Color
mixing is not supported in the color palette as a default, but may be added to the
palette as needed.
Panel Select Displays
Three select displays are located on the console’s
front panel. These can be used to access Preset,
Color, Beam, Group, Macro, Snapshot, and Effect
select functions.
20 select buttons (labeled 1 through 20) are provided
at each display. These are used to activate the data
stored the selects. (The last selected item will remain
highlighted.)
As a default, BEAMS will be selected at the top
display, COLORS at the middle display, and
PRESETS at the bottom display.
Access a different page within a display:
Press desired page button (1 through 5) at top of
select display.
Access a different bank within a display:
Press and hold [Bank/Function] button while pressing
the buttons labeled [11] through [20] to change banks
in increments of 100. Each bank will provide 20
select buttons per page.
15
14
16
17 18 19
7 8 9
20
10
17
18
19 20
Bank / Function
1 2 3
5
4 6
1211 13
1211 13
1 2 3
1514 16
54 6
Bank / FunctionPalette Shift
1211
13
1514 16
1 2 3 54 6
Bank / Function
7 8 9 10
1817 19 20
7 8 9 10
Beams
Colors
Presets