Service manual

MAINTENANCE : MAINTENANCE PROCEDURES
2
02.9663.0010 D 23-Oct-02 33
Figure 2-13: Aligning Gobo Wheel Gears
open
1
2
3
4
5
6
Alignment Mark
1) Start with center gear alignment
mark facing Position 1 (open).
2) Rotate center gear clockwise until alignment
mark is directly across from Position 6. Rotate
Position 6 gear until marks align.
Align both marks
6
5
3) Align remaining gobo gears
using the same method.
4) Verify alignment of all marks
and adjust as necessary.