Service manual

VARI❋LITE® - VL1000™ ERS LUMINAIRE SERVICE MANUAL
24 23-Oct-02 02.9663.0010 D
Front Cover Removal
Parts:
ASSY, FRONT COVER (22.9663.1038)
Tools:
#2 Phillips screwdriver
To remove and replace front cover:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At head assembly, press in front cover latches to release (Figure 2-7).
Step 3. Pull cover straight out until stopped by tether.
Step 4. Disconnect tether by removing 8-32x1/2" PFB screw and 8-32 Keps nut as
shown.
Step 5. Remove cover.
Step 6. Replace front cover by doing steps 2 through 5 in reverse. Ensure latches
lock into place.
Figure 2-7: Front Cover Removal/Replacement
Front Cover
Head Assembly
Press in to
Latch (x2)
Yoke not shown for clarity.
NOTE:
release cover
Remove this 8-32x1/2" screw
(and nut) to disconnect tether