User Manual
Table Of Contents
- 4343W X-ray Detector
- Table of Contents
- List of Tables
- List of Figures
- 1.0 Scope
- 2.0 Contraindication
- 3.0 Intended Use
- 4.0 Audience
- 5.0 Abbreviations
- 6.0 Definition of Symbols
- 7.0 Standards and Regulations
- 8.0 Description of the 4343W
- 8.1 Shipment Contents
- 8.2 Optional Parts
- 8.3 X-ray Detector Surfaces and Features
- 8.4 X-ray Detector Dimensions
- 8.5 X-ray Detector Specifications
- 8.6 Environmental Considerations
- 8.7 X-ray Detector Battery
- 8.8 Optional Varex Provided Inductive Battery Charger
- 8.9 Designing a Custom Inductive Battery Charger
- 8.10 Using a Third-Party Inductive Battery Charger
- 8.11 Power-on and Power-off Sequence
- 8.12 Reboot Sequence
- 8.13 LED Status Indicator Behavior
- 8.14 Position Sensing
- 8.15 Detector Sharing
- 9.0 The Detector Configuration File
- 10.0 System Software
- 11.0 Maintenance
- 12.0 Troubleshooting
- 13.0 Disposing of the X-ray Detector and Battery
- 14.0 Safety - Electromagnetic Interference
- 15.0 Regulatory
- Index
www.vareximaging.com 17
4343W X-ray Detector
REFERENCE MANUAL
Figure 12 Varex Inductive Battery Charger Dimensions and Mounting Hole Locations
WARNING
Alignment between the Varex Inductive Battery Charger and the X-ray
Detector should be exact. Poor alignment or foreign objects may cause
overheating.
Caution
The Varex Inductive Battery Charger and the X-ray Detector charging
location should be flush when charging.
Caution
The Varex Inductive Battery Charger and Detector Support may not fit
all Bucky Trays. System Integrator should qualify Bucky Tray before
installing.
Caution
Screw heads must be sub-flush to avoid damage caused to the X-ray
Detector when inserted into the Bucky Tray.