User Manual

ManualsBrandsVarex Imaging ManualsElectronicsDigital Image Receptor

Table Of Contents

4343W X-ray Detector
Table of Contents
List of Tables
List of Figures
1.0 Scope
2.0 Contraindication
3.0 Intended Use
4.0 Audience
5.0 Abbreviations
6.0 Definition of Symbols
7.0 Standards and Regulations
8.0 Description of the 4343W
- 8.1 Shipment Contents
- 8.2 Optional Parts
- 8.3 X-ray Detector Surfaces and Features
- 8.4 X-ray Detector Dimensions
- 8.5 X-ray Detector Specifications
- 8.6 Environmental Considerations
- 8.7 X-ray Detector Battery
- 8.8 Optional Varex Provided Inductive Battery Charger
  - 8.8.1 Installing the Varex Provided Inductive Battery Charger
- 8.9 Designing a Custom Inductive Battery Charger
- 8.10 Using a Third-Party Inductive Battery Charger
- 8.11 Power-on and Power-off Sequence
- 8.12 Reboot Sequence
- 8.13 LED Status Indicator Behavior
- 8.14 Position Sensing
- 8.15 Detector Sharing
9.0 The Detector Configuration File
10.0 System Software
- 10.1 Radiography Acquisition
- 10.2 vTrigger Acquisition (AED)
- 10.3 X-ray Generator Interface Signals
- 10.4 SDK Installation
- 10.5 X-ray Detector Calibration
- 10.6 Linking to the X-ray Detector
- 10.7 ViVA Configuration Settings
- 10.8 Image Acquisition
  - 10.8.1 Acquiring Radiography Images
  - 10.8.2 Radiographic Acquisition Settings
- 10.9 VSP Control Panel
11.0 Maintenance
- 11.1 Cleaning and Disinfecting
- 11.2 Field Replaceable Parts
12.0 Troubleshooting
- 12.1 After-sales Service for Varex Imaging Products
13.0 Disposing of the X-ray Detector and Battery
14.0 Safety - Electromagnetic Interference
- 14.1 Electromagnetic Emissions
- 14.2 Electromagnetic Immunity
- 14.3 Radio Frequency (RF) Compliance Information
  - 14.3.1 United States FCC Compliance
15.0 Regulatory
- 15.1 Industry Canada Notice
- 15.2 Declaration of Conformity for European Union
Index

www.vareximaging.com 11

4343W X-ray Detector

REFERENCE MANUAL

8.5 X-ray Detector Specifications

Table 6 X-ray Detector Specifications

Sensor

Detector Amorphous Silicon active TFT/PIN diode Technology

Scintillator CSI Premium, CSI Standard, and DRZ+

Pixel Matrix 3072 (v) x 3072 (h)

Pixel Pitch 139 µm

Active Area 3062 (v) x 3062 (h) DRZ+, 3052 (v) x 3052 (h) CSI

Electronics

Battery Lithium-ion

Battery Charger 1 or 3 Bay, Inductive

ADC 16-bit

Mechanical

Housing Plastic with Carbon Fiber entrance window

Weight (with Battery) DRZ+ 3.1 kg (6.83 lbs), CSI 3.3 kg (7.27 lbs)

Load Support 200 kg over diameter 40 mm at center, 300 kg entire surface

Surface Temperature Rated to not exceed 42°C

Wireless Communication

Signal Strength Requires > -70 dBm or no image will be acquired

Standard IEEE 802.11ac/a/n

Interface USB

Security

• WEP

• WPA

• WPA2

Operating Voltage DC 5V

Radio

Antenna 2 x IPEX connector for 2T2R

Frequencies

• UNII - 1: 5150MHz - 5250MHz

• UNII - 3: 5725MHz - 5850MHz

Note: Subject to local regulations

Modulation

• 802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

• 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

• 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)