User Manual

4343W X-ray Detector
8 www.vareximaging.com
REFERENCE MANUAL
8.2 Optional Parts
The 4343W shall only be used with its approved Varex Imaging accessories and replacement
parts. Product certification and warranty are void if any modifications to the product is made, or
any instruction, warning, or caution is not followed.
Upon receipt, inspect the shipment and its contents against the Delivery Note enclosed with the
shipment for evidence of damage or missing components. Save all shipping containers in case a
return is warranted. If there is any discrepancy, See “After-sales Service for Varex Imaging Prod-
ucts” on page 56.
Table 4 Optional Parts and Accessories
Description Length
Inductive Charger N/A
Inductive Charger Power Supply 3.3 ft/1m
Varex 1-bay Battery Charger N/A
Varex 1-bay Battery Charger Power Supply, 65W, 19V 3.3 ft/1m
1-bay Battery Charger Mounting Plate N/A
Varex 3-bay Battery Charger N/A
Varex 3-bay Battery Charger Power Supply 19V, 85W 3.3 ft/1m
3-bay Battery Charger Mounting Plate N/A
Varex Wireless Battery N/A
Battery Overlay LED Display (Silver, Pd Silver, Black,
Pure White, Var101 White)
N/A
Mains Hospital Grade 110V Cable 6.5 ft/2.0m
Mains European Cable 8.2 ft/2.5m
Mains Chinese Cable 8.2 ft/2.5
Note
Accessory or optional equipment connected to the analog and digital
interfaces must be certified to the respective IEC standards (i.e., IEC
60601-1 for medical equipment). Furthermore, all configurations shall
comply with the system standard IEC 60601-1-1. Anyone connecting
additional or optional equipment to the signal inputs or signal outputs as
part of a configuration for medical equipment is therefore responsible for
compliance with the equipment standard IEC 60601-1. If in doubt, consult
technical support personnel.