User guide

LA Stand-Alone Product User Guide
Revision A7
Page 12
2.2 Selecting a mounting area
The unit should be mounted in a solid, clean, dry location with adequate ventilation.
Avoid mounting areas that:
 Obstruct the intake or exhaust of the internal forced air cooling.
 Allow dust, debris to enter and contaminate the cooling capability of the drive.
 Have humidity above 80% or are susceptible to moisture or coolant.
 Are prone to corrosive or flammable materials.
 Have an ambient temperature higher than 85°F (30°C).
 Vibrate, are susceptible to vibration or that could transmit the cooling fan vibration to sensitive
test equipment.
Note: The StandAlone’s allowable power output is limited by the amplifier heatsink temperature. Any
reduction in cooling capability will be directly proportional to a reduction in performance.