Specifications

90
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6.12 Configuration Recovery
To recover the 2460 data base by loading a previously saved configuration:
1. Open the Web interface for the 2460 System Hub (see “Using the Web Interface” on
page 80).
2. Ensure that Write Protection is disabled. The current status can be viewed in the
Overview tab of the Web Interface. See “Write Protection” on page 94 for further
information.
3. Select the Configuration Data Base (CDB) tab.
4. Click the Browse button and select the saved configuration database file.
Note! CDB files from 2460 System Hubs with firmware versions later than 1.A2 must
not be uploaded to a 2460 with firmware version 1.A2.
5. Click the Upload button.