Specifications

87
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6.10 Restore to Factory Defaults
You may remove the current configuration and reset the 2460 System Hub to factory defaults.
To reset the 2460 to factory defaults:
1. Open the Web interface for the 2460 System Hub. See “Using the Web Interface” on
page 80.
2. Select the Configuration Data Base (CDB) tab.
3. Click the Restore button.
4. A dialog appears which prompts you to confirm the restore command.
5. Click “Cancel” in case you want to interrupt, or “Yes” to proceed with resetting the
current configuration to the factory default configuration.
Note!
Restoring the 2460 is to factory default can not be reversed. It may be a good idea to save the
CDB in case you would like to return to the current configuration (see “Configuration Backup”
on page 88).