Specifications

85
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6.8.2 Downloading log files to a PC
Log files can be transferred to a PC by using one of the two methods:
 Remove the USB stick or SD card and copy the log files to the desired location on a PC as
described below in “Copy from USB stick or SD card”.
 Download via the Web interface as described in “Downloading via the Web interface”
below.
Copy from USB stick or SD card
1. Unmount the USB stick/SD card.
a. In the Web Interface select the Overview tab.
b. Click the Unmount button.
Note!
Logging will be resumed when the USB stick/SD card is inserted into the 2460 again.
2. Remove the USB stick/SD card and insert into a PC.
3. Copy the log files from the “comlogs” folder to the desired destination folder on the PC.
Downloading via the Web interface
1. Open the Web interface for the 2460 System Hub. See “Using the Web Interface” on
page 80.
2. Ensure that logging is stopped (see “To stop logging” on page 84).
3. Select the Logging tab.
4. Click the Logs button.
5. Choose the desired destination.
Note!
Downloading the log files may take up to ten minutes depending on the amount of data.