Specifications

1
Reference Manual
00809-0100-2460, Rev AA
Section 1: Introduction
November 2014
Introduction
Section 1 Introduction
1.1 Safety Messages
Procedures and instructions in this manual may require special precautions to ensure the safety
of the personnel performing the operations. Information that raises potential safety issues is
indicated by a warning symbol ( ). Refer to the safety messages listed at the beginning of each
section before performing an operation preceded by this symbol.
Failure to follow these installation guidelines could result in death or
serious injury:
 Make sure only qualified personnel perform the installation.
 Use the equipment only as specified in this manual. Failure to do so
may impair the protection provided by the equipment.
 Ensure that the lid on the housing is closed during operation.
Electrical shock could cause death or serious injury:
 Use extreme caution when making contact with the leads and
terminals.
Any substitution of non-recognized parts may jeopardize safety. Repair,
e.g. substitution of components etc., may also jeopardize safety and is
under no circumstances allowed.