Specifications

79
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6. Unplug the Main Board connector.
7. Remove the Power Supply Unit.
8. Replace the Power Supply Unit with a new one.
9. Attach the Main Board connector, replace the screws, and plug in the power supply.
10. If removed, replace the lid on the 2460 housing and ensure that the lid is secured with
the ring.
11. Ensure that the lid is properly closed and sealed.
Main Board connector
LED board