Specifications

Reference Manual

00809-0100-2460, Rev AA

Section 6: Service and Troubleshooting

November 2014

Service and Troubleshooting

6.4 Exchanging a Modem Card

The modem cards can be replaced during operation. The 2460 supports plug-and-play and the

proper protocol settings will automatically be used when the 2460 detects a new modem card.

1. Loosen the captive locking screws and open the lid on the 2460 housing.

2. Turn the locking screw 90 degrees and open the modem card cover.

3. Carefully pull the modem card out.

4. Insert the new card into the card holder. Gently push the modem card until it is properly

plugged in to the Main board contact.

5. Close the modem card cover.

6. Turn the Locking screw to secure the cover.

POWER

LED BOARD

Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7a Port 8a

WRITE PROT

ON/OFF

Cover

Locking screw