Specifications

67
Reference Manual
00809-0100-2460, Rev AA
Section 5: Operation
November 2014
Operation
5.3.4 Status LED
When the 2460 is starting up, all the LEDs are turned on. After 0.5 seconds the yellow (Status)
LED is turned off.
In runtime operation the Status LED (yellow) blinks at a constant rate as shown in Table 5-3.
Figure 5-4. Status information is presented by the yellow status LED
Table 5-3. LED sequence in runtime operation
Status LED
(Yellow)
Description
On=50 ms
Off=9000 ms
Full mode
On=50 ms
Off=200 ms
On=50 ms
Off=8700 ms
Redundant system; passive
(secondary) 2460 System Hub
On=1000 ms
Off=500 ms
Reduced mode (warning)
Status LED (Yellow)