Specifications

32
Reference Manual
00809-0100-2460, Rev AA
Section 3: Installation
November 2014
Installation
Table 3-5. Terminal assignment
Terminal Designation Function
Port 1
Field device
Communication bus for field devices. Supports electrical interface
TRL2 and RS485.
See “Digital Communication Protocols” on page 103 for more
information.
Port 2
Port 3
Port 4
Port 5
Field device/Host
Port 5 and 6 can be configured for field or host communication (see
“Communication Ports” on page 29 for more information).
Port 6
Port 7a
Host/TankMaster
Communication bus for host. Ports designated “a” and “b” are
connected in parallel. Supports electrical interface TRL2, RS485,
RS422, and RS232. See “Digital Communication Protocols” on
page 103 for more information.
Port 7b
Port 8a
TankMaster
Communication bus for TankMaster.
Ports designated “a” and “b” are connected in parallel. Supports
electrical interface TRL2, RS485, RS422, and RS232.
Port 8b
ETH 1
Standard
Ethernet port
Ethernet communication bus.
ETH 2
ETH 3 Service Ethernet communication bus for service purposes. Use this port to
access the Web interface for the 2460 (see “Using the Web
Interface” on page 80).
USB A 2.0 USB Port for USB stick. Can be used for saving log files.
SD card SD Memory card reader for saving log files.
Ground bar For connection of cable shields.