Specifications

25
Reference Manual
00809-0100-2460, Rev AA
Section 3: Installation
November 2014
Installation
4. Attach the 2460 to the wall. There are four holes on the housing to be used for the
screws. The required screw dimension is given by Figure 3-2 on page 26.
5. Ensure that the Lock ring (a) on the cover to the communication board compartment is
folded so that it does not prevent the lid from being properly closed. Close the lid and
ensure that it is fully engaged to prevent water from entering the terminal
compartment. Torque the two screws to 4Nm (35 in.-lb).
Four holes for
attaching the 2460
to a wall
(a) Lock ring
Communication board
compartment