Specifications

Reference Manual

00809-0100-2460, Rev AA

Section 3: Installation

November 2014

Installation

3.4 Mechanical Installation

See also Mechanical Installation Drawing D7000001-927 for further information.

The housing of the Rosemount 2460 is designed with four holes for attaching the 2460 to a wall

using four screws.

Note!

Ensure that the 2460 is installed to minimize vibration and mechanical shock.

1. Mark the positions of the four screws to be used for attaching the 2460 to the wall. A

mounting template (see Figure 3-1 on page 26) is shipped with the 2460 which may be

used for this purpose.

2. Drill four holes with appropriate size to fit screw diameter 6 mm.

3. Loosen the two screws (M6 x 2) on the 2460 housing that keep the lid in closed position

and open the lid.

2460-

TAG:

S/N:

MFG (yymmdd):

DEVICE ID:

MAINS: 100-250VAC 50/60Hz, 24-48VDC 20W

MADE IN GOTHENBURG SWEDEN