Specifications

17
Reference Manual
00809-0100-2460, Rev AA
Section 2: Overview
November 2014
Overview
TankMaster HMI Software
TankMaster is a powerful Windows-based Human Machine Interface (HMI) for complete tank
inventory management. It provides configuration, service, set-up, inventory, and custody
transfer functions for Rosemount Tank Gauging systems and other supported instruments.
TankMaster is designed to be used in the Windows 7 and Microsoft Windows Server 2008
environment providing easy access to measurement data from your Local Area Network (LAN).
The TankMaster WinOpi program lets the operator monitor measured tank data. It includes
alarm handling, batch reports, automatic report handling, historical data sampling as well as
inventory calculations such as Volume, Observed Density and other parameters. A plant host
computer can be connected for further processing of data.
The TankMaster WinSetup program is a graphical user interface for installation, configuration and
service of devices in the Rosemount Tank Gauging system.
Rosemount 2460 System Hub
The 2460 System Hub is a data concentrator that continuously polls and stores data from field
devices such as radar level gauges and temperature transmitters in a buffer memory. Whenever
a request for data is received, the 2460 can immediately send data from a group of tanks from
the updated buffer memory.
Rosemount 2410 Tank Hub
The Rosemount 2410 Tank Hub acts as a power supply to the connected field devices in the
hazardous area using the intrinsically safe Tankbus.
The 2410 collects measurement data and status information from field devices on a tank. It has
two external buses for communication with various host systems.
There are two versions of the 2410; one for single tank operation and one for multiple tanks
operation. The 2410 multiple tanks version supports up to 10 tanks and 16 devices. With the
Rosemount 5300 and 5400 level transmitters the 2410 supports up to 5 tanks.
The 2410 is equipped with two relays which support configuration of up to 10 “virtual” relay
functions allowing you to specify several source signals for each relay.
The 2410 supports Intrinsically Safe (IS) and Non-Intrinsically Safe (Non-IS) analog 4-20 mA
inputs/outputs. By connecting a Smart Wireless THUM Adapter to the IS HART 4-20 mA output,
the 2410 is capable of wireless communication with a Smart Wireless Gateway in a
WirelessHART network.