Specifications

Reference Manual

00809-0100-2460, Rev AA

Section 6: Service and Troubleshooting

November 2014

Service and Troubleshooting

6.16 Replacing the Backup Battery

In case a battery warning appears, you will have to change the backup battery which is located

on the Main Board. To change the battery you will have to remove the Terminal Board which is

stacked on top of the Main Board.

Make sure that a button battery of type Renata 3V CR 1632 lithium is used.

To replace the Backup Battery:

1. Remove the Terminal Board as described in “Exchanging the Terminal Board” on

page 76.

2. Locate the Backup battery on the Main Board.

3. Replace the battery with a button battery of type Renata 3V CR 1632 lithium. Ensure

that the battery is placed with the + side facing up.

4. Replace the Terminal Board.

5. Set date and time (see “Setting the Real-Time Clock” on page 97).

LED BOARD

Backup battery

Main Board