Specifications

95
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6.15.2 Software Write Protection
The current write protection status can be viewed in the 2460 Web Interface.
1. Open and log in to the Web Interface as described in “Using the Web Interface” on
page 80.
2. Select the Overview tab.
3. Enable or disable software write protection by choosing the desired option from the
drop-down list. Note that in case the 2460 is hardware write protected, the current SW
write protection can not be changed.