Specifications

92
Reference Manual
00809-0100-2460, Rev AA
Section 6: Service and Troubleshooting
November 2014
Service and Troubleshooting
6.13 Firmware Upgrade
To upgrade the 2460 firmware:
1. Open the Web interface for the 2460 System Hub. See “Using the Web Interface” on
page 80.
2. Select the FW Upgrade tab.
3. Click the Browse button and select the firmware file.
4. Click Apply to start the firmware upgrade.
5. Verify that the firmware version is updated by opening the "Overview" tab once the
firmware upgrade is completed.
Note!
The firmware upgrade process must not be interrupted. When upgrading, do not unplug power
supply or close the web browser until the process is complete. In case the upgrade process was
interrupted, repeat the procedure.