Technical information

7500 RTG
14 Varec, Inc.
Sample Hatch for 7532 RTG
For control and cleaning purposes for sample taking as
well as for hand dipping (tape), a sample hatch is
recommended. The sensor head of 7532 RTG (planar
antenna!) can be easily checked in the area of the
opening. Manual gauging with gauge rod or tape is
possible without removal of the transmitter. The lower
edge of the opening is the reference for the gauging.
The construction is only suitable for non-pressurized
operation and should be used for the planar antenna
version 7532 RTG only.
Note! The sample hatch is not part of the standard offering
from Varec. Please contact Varec for further information.
Sample Hatch
Weather Protection Cover
A weather protective cover made of stainless steel is
available for outdoor mounting (order code: 543199-
0001). The shipment includes the protective cover and
tension clamp.
Weather Protection Cover
Pivoting Element for 7500 Series Radar Tank
Gauge 7532 RTG
The pivoting element is
intended for the 7500 Series
Radar Tank Gauge with planar
antenna. It serves to swivel the
7500 Series Radar Tank Gauge
from the measuring position,
e.g. to clean the antenna or dip
the tank. The pivoting element
is not part of the standard
offering from Varec. For more
information please contact
your Varec representative.
Note! When mounting, avoid any gaps within the path of the
beam.
Flange DN150 DN200 DN250/300
PN [bar]161616
A [mm] 110 140 170
L [mm} — 300 450
Flange ANSI 6" ANSI 8" ANSI 10"
PN [lbs] 150 150 150
A [mm] 110 140 170
L [mm} — 300 450