Technical information

Technical Information 13
Radar Tank Gauge
Accessories
Antenna Extension for 7530 RTG
The antenna extension has to be selected such that the
horn extends below the nozzle.
If the horn diameter is greater than the nominal width
of the nozzle, the antenna including the extension is
mounted from inside the vessel. The bolts are tightened
from outside, with the instrument lifted up. The
extension has to be selected such that the instrument
can be lifted by at least 100 mm (4”).
Antenna extension
Antenna extension dimensions
UNI Flange
Varec UNI flanges are designed for non-pressurized
operation. Typical pressure fluctuations of breather
valves can be tolerated. The number of bolts has
sometimes been reduced. The bolt-holes have been
enlarged for adaption of dimensions, therefore, the
flange needs to be properly aligned to the
counterflange before the bolts are tightened.
Uni Flange
> 100 mm/4”
Radar
Version Compatible
with
D
[mm]
K [mm] Type plate
no.
1000 DN150 PN16
ANSI 6"
150lbs
JIS 10K 150
280 240 942455-
3001
2000 DN200 PN16
ANSI 8"
150lbs
JIS 10K 200
340 294.5 942455-
3002
3000 DN250 PN16
ANSI 10"
150lbs
JIS 10K 250
405 358 942455-
3003
4000 DN300 PN16
ANSI 12"
150lbs
JIS 10K 300
482 410 (for DIN)
431.8 (for ANSI)
400 (for JIS)
404.5 (for DIN
+ JIS)
942455-
3004
K
D
Ø 23
Ø 12
K
6x60°
4x90°
15°
D
Ø 26
Ø 78
Ø 101
K
D
Ø 29
12x30°
AA
A-A
1
8
4 x Ø7 shifty at 90°
material: 1.4301
for little
bolts
Variant 1000
Variant 2000
Variant 3000
sealing surface
Ø 63.2