Instruction manual

Operation
32 Installation and Operations Manual
6.1.1 General structure of the operating menu
The operating menu is made up of two levels:
• Function groups (00, 01, 03, …, 0C, 0D): The individual operating options of the
device are split up roughly into different function groups. The function groups that
are available include, e.g.: “basic setup”, “safety settings”, “output”, “display”, etc.
• Functions (001, 002, 003, …, 0D8, 0D9): Each function group consists of one or
more functions. The functions perform the actual operation or parameterization of
the device. Numerical values can be entered here and parameters can be selected
and saved. The available functions of the “basic setup” (00) function group include,
e.g.: “tank shape” (002), “medium property” (003), “process cond.” (004), “empty
calibr” (005), etc.
If, for example, the application of the device is to be changed, carry out the following
procedure:
1. Select the “basic setup” (00) function group.
2. Select the “tank shape” (002) (function (where the existing tank shape is selected).
6.1.2 Identifying the functions
A numeric position is shown on the display, which corresponds to the current user
position in the functional menu.
Figure 6-2: Functions Menu
The first two digits identify the function group:
Table 6-1: Identifying the Function Groups - First Two Digits
The third digit numbers the individual functions within the function group:
Table 6-2: Individual Functions within the Function Group - Third Digit Numbers
Here after the position is always given in brackets (e.g. “tank shape” (002)) after the
described function.
• basic setup 00
• safety settings 01
• linearization 04
...
• basic setup 00

• tank shape 002
• medium property 003
• process cond. 004
...