Specification

TECHNICAL DATA
VARATHANE
®
SPAR URETHANE
Rust-Oleum Corporation Form: RAC-24
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 013013
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
]PHYSICAL PROPERTIES PH
YSICAL t
Gloss
Semi-Gloss
Satin-Gloss
Resin Type
Linseed oil modified Alkyd
Linseed oil modified Alkyd
Linseed oil modified Alkyd
Pigment Type
None
None
None
Solvents
Mineral Spirits
Mineral Spirits
Mineral Spirits
Weight
Per Gallon
8.4 lbs.
8.2 lbs.
8.2 lbs.
Per Liter
1.0 kg
0.98 kg
0.98 kg
Solids
By Weight
52.7%
50.6%
49.7%
By Volume
48.2%
46.9%
46.3%
Volatile Organic Compounds
349 g/l
350 g/l
350 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
1 mil
1 mil
1 mil
Wet Film to Achieve DFT
(unthinned material)
2 mil
2 mil
2 mil
Theoretical Coverage at
1 mil DFT (25µ) sq.ft./gal
868 sq.ft./gal.
771 sq.ft./gal.
743 sq.ft./gal.
Practical Coverage at
Recommended DFT (sq.ft./gal)
(assumes 15% material loss)
650 sq.ft./gal.
640 sq.ft./gal.
630 sq.ft./gal.
Dry Times at
77°F (25°C)
and 50%
Relative
Humidity
Touch
2 hours
2 hours
2 hours
Recoat
4 hours
4 hours
4 hours
Light Traffic
24 hours
24 hours
24 hours
Shelf Life
3 years
3 years
3 years
Flash Point
107° F (42°C)
107° F (42°C)
107° F (42°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.