Technical Specifications

TECHNICAL DATA
VAR-104
VARATHANE
®
AGED WOOD ACCELERATOR
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙901∙0411
www.rustoleum.com
Form: ARJ-2114
Rev.: 092420
PHYSICAL PROPERTIES
AGED WOOD ACCELERATOR
Resin
Alkyd emulsion
Pigment Type
Inorganic
Solvents
Propylene glycol
Weight
Per Gallon
8.34-8.41 lbs.
Per Liter
.099-1.00 kg
Solids
By Weight
0.43-6.36%
By Volume
0.23-5.58%
Volatile Organic Compounds
<260 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
Varies depending on wood type and porosity
Wet Film to Achieve DFT
(unthinned material)
Varies depending on wood type and porosity
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Up to 275 sq.ft./qt. (25m
2
/946mL) depending on wood type and porosity
Dry Times at 70°F
(21°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
1-4 hours
Fully Dry
1-4 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.