Specification

TECHNICAL DATA
VARATHANE
®
POLYURETHANE CLEAR RIPPLED FINISH
Rust-Oleum Corporation Form: GDH-601
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 121614
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
]PHYSICAL PROPERTIES
PH
Physical Properties
POLYURETHANE CLEAR RIPPLED FINISH
Resin Type
Acrylic Oil/Modified Urethane
Pigment Type
NA
Solvents
Glycol Ethers, Water
Weight
Per Gallon
8.54 lbs.
Per Liter
1.02 kg
Solids
By Weight
38.8%
By Volume
35.9%
Volatile Organic Compounds
Max 275 g/l (2.30 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
2.0 mils
(50µ)
Wet Film to Achieve DFT
(unthinned material)
6.0 mils
(150µ)
Theoretical Coverage at
1 mil DFT (25µ)
144 sq.ft./quart
(3.5 m
2
/l)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
50 sq.ft./quart
(1.23 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Recoat
2 hours
Light Use
48 hours
Full Cure
7 days
Shelf Life
3 year
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.