Specification

TECHNICAL DATA
VARATHANE
®
TRIPLE THICK POLYURETHANE
Rust-Oleum Corporation Form: GDH-592
11 Hawthorn Parkway Phone: [phone] Rev.: 121614
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
].PHYSICAL PROPERTIES PH
YSICAL t
TRIPLE THICK POLYURETHANE
Resin Type
Polyurethane/Acrylic
Pigment Type
Inorganic
Solvents
Glycol Ethers and Water
Weight
Per Gallon
8.50-8.56 lbs.
Per Liter
1.02-1.03 kg
Solids
By Weight
38.6-38.8%
By Volume
36.0-36.4%
Volatile Organic Compounds
275 g/l
2.28 lbs./gal.
Recommended Dry Film
Thickness (DFT) Per Coat
3 mils
(75µ)
Wet Film to Achieve DFT
(unthinned material)
9 mils
(225µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
50 sq.ft./quart
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Handle (light use)
48 hours
Recoat
2 hours
Full Cure
7 days
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.