Specification

TECHNICAL DATA
VARATHANE
®
SPAR VARNISH BRUSH
Rust-Oleum Corporation Form: GDH-866
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 060215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
PHY
SPAR VARNISH BRUSH
Resin Type
Acrylic/Polyurethane Dispersion
Pigment Type
None
Solvents
Glycol Ethers, Water
Weight
Per Gallon
8.50-8.60 lbs.
Per Liter
1.02-1.03 kg
Solids
By Weight
26.6-27.3%
By Volume
24.6-25.6%
Volatile Organic Compounds
<275 g/l (2.30 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
(25-37.5µ)
Wet Film to Achieve DFT
(unthinned material)
4.0-6.0 mils
(100-150µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
400-600 sq.ft./gal. (9.8-14.8 m
2
/l)
100-125 sq.ft./quart (2.5-3.0 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Handle
1 hour
Recoat
2 hours
Full Cure
7 days
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.