Specification

TECHNICAL DATA
RUST-OLEUM
®
SOFT TOUCH POLYURETHANE MATTE
Rust-Oleum Corporation Form: GDH-506
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 101614
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
Physical Properties
SOFT TOUCH POLYURETHANE
Resin Type
Acrylic Urethane
Pigments
Clear
Solvents
Water
Weight
Per Gallon
8.50 lbs.
Per Liter
1.03 kg
Solids
By Weight
25.4%
By Volume
24.8%
Volatile Organic Compounds
<250 g/l (<2.08 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT (unthinned
material)
4.0-8.0 mils
(100-200µ)
Theoretical Coverage at 1 mil DFT
(25µ)
100 sq.ft./gal.
(2.5 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
100-150 sq.ft./quart
(2.5-3.7 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Handle
2 hours
Recoat
2 hours
Shelf Life
2-3 years
Flash Point
>200° F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.