Specification

TECHNICAL DATA
VARATHANE
®
STAIN + POLY
Rust-Oleum Corporation Form: GDH-752
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 031315
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
STAIN + POLY
Resin
Water-based Acrylic Modified Urethane
Pigment Type
Organic Pigments
Solvents
Water, Glycol Ethers
Weight
Per Gallon
8.53-8.55 lbs
Per Liter
1.022-1.024 kg
Solids
By Weight
26.9-27.6%
By Volume
29.5-30.3%
Volatile Organic Compounds
<275 g/l (2.30 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0 mil
(25µ)
Wet Film to Achieve DFT
(unthinned material)
3.0 mils
(75µ)
Theoretical Coverage at
1 mil DFT (25µ)
118-121 sq.ft./quart
(2.9-3.0 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
100-125 sq.ft./quart
Varies with type and porosity of wood
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Handle
4 hours
Recoat
2 hours
Full Cure
7 days
Shelf Life
3 years (unopened)
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.