Specification

TECHNICAL DATA
VARATHANE
®
POLYURETHANE FLOOR FINISH (275 VOC)
.PHYSICAL PROPERTIES .
Rust-Oleum Corporation Form: GDH-862
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 060215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSIC
POLYURETHANE FLOOR FINISH
Resin Type
Oil Modified Urethane
Pigment Type
NA
Solvents
Parachlorobenzotrifluoride, Mineral Spirits
Weight
Per Gallon
8.4-9.1lbs.
Per Liter
1.00-1.09 kg
Solids
By Weight
42.4-45.5%
By Volume
43.7-44.0%
Volatile Organic Compounds
275 g/l (2.30 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
(25µ)
Wet Film to Achieve DFT
(unthinned material)
2.0-3.5 mils
(50-87.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
400-500 sq.ft./gal.
(9.9-12.3 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
4 hours
Handle
8 hours
Recoat
12 hours
Full Cure
7 days
Shelf Life
3 years
Flash Point
105° F (40°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.