Specification

TECHNICAL DATA
VARATHANE
®
SANDING SEALER
.PHYSICAL PROPERTIES .
Rust-Oleum Corporation Form: GDH-514
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 102014
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
A
SANDING SEALER
Resin Type
Acrylic
Pigment Type
Inorganic
Solvents
Water
Weight
Per Gallon
9.0 lbs.
Per Liter
1.08 kg
Solids
By Weight
27.5%
By Volume
21.6%
Volatile Organic Compounds
125 g/l
(1.04 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
(25-37.5µ)
Wet Film to Achieve DFT
(unthinned material)
4.5-7.0 mils
(112.5-175µ)
Theoretical Coverage at
1 mil DFT (25µ)
346 sq.ft./gal.
(8.5 m
2
/l)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
250-350 sq.ft./gal.
60-90 sq.ft./quart
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
1-2 hours
Light Use
24 hours
Full Cure
3 days
Flash Point
200°F (93°C)
Shelf Life
3 years
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.