Technical Specifications

TECHNICAL DATA
VAR-101
VARATHANE
®
PREMIUM
GEL STAIN
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙901∙0411
www.rustoleum.com/varathane
Form: ARJ-2070
Rev.: 121720
PHYSICAL PROPERTIES
GEL STAIN
Resin Type
Linseed Oil Modified Alkyd
Pigment Type
Silica
Solvents
Mineral Spirits
Weight
Per Gallon
7.2-7.5 lbs.
Per Liter
0.86-0.89 kg
Solids
By Weight
39.1-43.3%
By Volume
32.2-34.6%
Volatile Organic Compounds
507-526 g/l (4.2-4.4 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Practical Coverage at Recommended DFT
(assumes 15% material loss)
200-250 sq. ft./quart
Dry Times at 70-80°C
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
2 hours
Top Coat
4 hours
Shelf Life
3 years
Flash Point
100°F (38°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.