Technical Specifications

TECHNICAL DATA
VARATHANE
®
PREMIUM WOOD PUTTY
.PHYSICAL PROPERTIES .
Rust-Oleum Corporation Form: GDH-649
11 Hawthorn Parkway Phone: Phone: [phone] Rev.: 011217
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PSICAL t
PREMIUM WOOD PUTTY
Resin Type
Acrylic
Pigment Type
Inorganic Types and Silica
Solvents
Water
Solids
By Weight
77.1-80.4%
By Volume
58.0-65.0%
Volatile Organic Compounds
<60 g/l (0.50 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Practical Coverage at Recommended DFT
(assumes 15% material loss) for 6 oz tube
Varies with type and porosity of wood
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Handle
1-2 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.