Manualshelf

Technical Specifications

ManualsBrandsVarathane ManualsPaint3.5 oz. Flat Color Group 7-Fill Stick (6-Pack)
12
TECHNICAL DATA
VAR-25
VARATHANE
®
PREMIUM
FILL STICKS
1
DESCRIPTION AND USES
Varathane
®
Premium Fill Sticks are a quick and easy way to
repair scratches, nicks, dents or other minor imperfections in
any wood surface. Premium Fill Sticks are suitable for
touching up furniture, cabinets, trim, doors and floors.
Premium Fill Sticks can be used to complement Varathane
Premium Wood Stains or blend different Fill sticks to create
custom colors.
PRODUCTS
SKU
DESCRIPTION (Fill Stick)
215362
Color Group 1
215363
Color Group 2
215364
Color Group 3
215365
Color Group 4
215366
Color Group 5
215367
Color Group 6
215368
Color Group 7
215369
Color Group 8
215370
Color Group 9
215371
Color Group 10
359932
Color Group 12
PRODUCT APPLICATION
SURFACE PREPARATION
If the area around the nick or dent is rough, sand the area
smooth by sanding with #120 grit sandpaper in the direction
of the grain. Remove all sanding dust with a vacuum or
clean rag dampened with mineral spirits.
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO
LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS
BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.
Wear a NIOSH-approved respirator to control lead exposure.
Clean up carefully with a HEPA vacuum and a wet mop.
Before you start, find out how to protect yourself and your
family by contacting the National Lead Information Hotline at
1-800-424-LEAD or log on to www.epa.gov/lead.
PRODUCT APPLICATION (cont.)
APPLICATION
Prior to repairs, determine the Fill Stick color that best
matches the wood project. See the front panel of the package
for Fill Stick color identification. Test the Fill Stick in an
inconspicuous area to ensure the chosen color will match the
project. Work the Fill stick into the defect until filled. Remove
excess material using a plastic putty knife.
DRY TIME
Dry time of product depends on depth of scratch or repair.
Most repairs will dry within 5 minutes. If more than one filling
is required, allow sufficient dry time between fillings.
PROTECTING YOUR PROJECT
If desired, additional protection of the repaired area can be
achieved by applying a thin coat of Varathane Diamond
Polyurethane. Apply the polyurethane with an artist acrylic
paint brush and follow the manufacturer’s directions for dry
times.

Summary of content (2 pages)