Specification

TECHNICAL DATA
VARATHANE
®
PREMIUM FILL STICKS
Rust-Oleum Corporation Form: GDH-17
11 Hawthorn Parkway Phone: [phone] Rev.: 032113
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
].PHYSICAL PROPERTIES P
HYSICAL t
PREMIUM FILL STICKS
Resin Type
Waxes
Pigment Type
Inorganic and Organic
Solvents
None
Weight
Per Gallon
8.75 lbs.
Per Liter
1.05 kg
Solids
By Weight
100%
By Volume
100%
Volatile Organic Compounds
None
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Varies with wood type
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Touch
5 minutes
Handle
5 minutes
Full Cure
10 minutes
Shelf Life
3 years
Flash Point
NA
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.