Specification

TECHNICAL DATA
VARATHANE
®
WOOD FILLER
Rust-Oleum Corporation Form: RAC-16
11 Hawthorn Parkway Phone: [phone] Rev.: 012413
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
].PHYSICAL PROPERTIES P
HYSICAL t
WOOD FILLER
Resin Type
Acrylic Emulsion
Pigment Type
Silica
Solvents
Water
Weight Per Gallon
14.7-15.5 lbs.
Per Liter
1.79-1.85 kg
Solids By Weight
77.1-80.4%
By Volume
58.0-65.0%
Volatile Organic Compounds
60 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Varies with wood type
Dry Times at
77°F (25°C) and
50% Relative
Humidity
Touch
1 hour
Handle
1 hour
Recoat
2 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety
Information
Warnings!
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.